An Elevated Infinity Pool With a Game Room Below: Mrs Sujata Nalli's Villa in Panshet, Pune
In October 2026 we handed over an elevated infinity pool at Mrs Sujata Nalli's villa in Panshet, near Pune. The pool sits about 12 feet above the ground, with a game room underneath it. It measures 7.6 m by 5.8 m, holds over 60,000 litres, and spills over two edges towards the Panshet backwaters. Crystal Pools handled it as a turnkey project , from design to handover.
Sarthak Shukla, CEO, Crystal Pools, at the pool after handover
Here's how it came together, what made it hard, and what we'd tell anyone planning a pool above ground level.
Project at a glance
Client | Mrs Sujata Nalli |
|---|---|
Location | Panshet, Pune (private gated community) |
Pool type | RCC infinity pool, elevated about 12 ft above ground |
Size | 7.6 m x 5.8 m, 1.37 m deep |
Infinity edges | 2 sides (the other 2 have a freeboard) |
Water volume | 60,000+ litres, comfortable for around 20 people |
Below the pool | A game room (Crystal built the shell; the interiors were done separately) |
Timeline | Work started February 2026, handed over 30 October 2026 |
Leakage warranty | 10 years |
Crystal's scope | Pool design, RCC structure, waterproofing, plumbing, electrical, filtration, tiling, pool lighting and the elevated deck |
Handed over on 30 October 2026
How Mrs Nalli found us
She found Crystal Pools on Google. Before she gave us the work, she came to our office in Dhayari to see our capabilities for herself. We'd tell every pool owner to do the same. She awarded us the project, and we started in February.
Why build the pool 12 feet up?
The plot is stepped. A pool at ground level would have eaten up a large part of the usable land, and it wouldn't have looked as good from the house either.
The plot is stepped, so the pool went up, not down
Raising the pool solved both problems. The pool and deck sit on top, and a full game room sits underneath. In the same footprint, the family now uses the space twice.
We built the game room as a structural shell. Its interiors were outside our scope. We stick to what we're experts in, which is the pool.
The game room under the pool, before finishing
The structure: built to carry 60 tonnes of water
Sixty thousand litres of water weighs about 60 tonnes. Add 20 people, the deck and the finishes, and the slab carries a serious load.
So the structure wasn't left to guesswork. An independent structural consultant designed it, and we built strictly to their drawings: shuttering, steel binding and concreting, with close checks so there's no honeycombing in the RCC. A pool slab over a living space has no room for weak concrete.
Shuttering under the pool slab. The game room sits underneath
Keeping the game room below dry
This is the first question everyone asks about a pool over a room, and it's fair.
We laid brickbat coba on the base, then waterproofed the pool shell with the MYK system, following the manufacturer's technical data sheet step by step. That covers crack and joint treatment, sealing every pipe and conduit opening, coving at the corners and two coats of membrane.
Brickbat coba on the base, before the MYK waterproofing
Then we filled the bare shell and left it for 72 hours. If there's a leak, this is when you want to find it, while the membrane is still exposed and before a single tile goes on. The game room stayed dry. Only after that did the plaster start.
The 72-hour water test, before any plaster or tiles
We've given this pool a 10-year warranty against leakage. Over a room the family uses every day, we wouldn't put our name to anything less.
Two infinity edges, and where the water goes
The pool has two infinity edges. The water spills over them into a catch basin we designed specially for this site.
The basin is 0.76 m wide. We sized it so that even with the pool full and 20 people jumping in together, the wave of water still lands inside the basin, not on the deck or the ground 12 feet below.
The catch basin: 0.76 m wide, and it doubles as the balancing tank
The catch basin also does the job of a balancing tank. We designed the plumbing so the infinity edge always stays level and running, without a separate balancing tank taking up space.
The plant room
The filter and pump sit in a separate plant room on the ground, one floor below the pool. That way the game room stays quiet, and our service team doesn't have to walk through it.
Sand filter: 700 mm diameter, with a 6-way multiport valve
Pump: 2 HP, made specifically for swimming pools, so there's no risk of current leaking into the water
The 700 mm sand filter in the plant room, one floor below the pool
Pipelines from the pool down to the plant room
Tiles chosen to match the backwaters
The Panshet backwaters are visible from the bungalow. We picked a glass mosaic in a blue shade that matches the colour of that water.
Blue glass mosaic, picked to match the backwaters
When the pool is full, the pool water and the backwaters blend into each other. That's what makes the infinity edge work here. The edge disappears.
Safety details on the deck
The deck is finished in 15 mm anti-skid vitrified tiles, so wet feet don't slip.
The granite coping around the pool is moulded on the inner edge. Raw granite edges are sharp, and children sit on that edge all day.
Granite coping, moulded on the inner edge
Ready for heating later
The pool isn't heated right now. We've built in the provision for it, so if the family wants warm water in winter, we can add a heat pump without touching the existing plumbing.
What made this project hard
Honestly, the timeline.
Panshet sits in the ghats, and the monsoon there doesn't let up. It pours day and night for weeks, and you can't do civil work in it. We knew that going in.
So we planned backwards from the monsoon. Excavation and the base were done by April. Then came the RCC, the concealed pool plumbing, the electrical conduits and the waterproofing, all finished before the rains arrived, so the structure was protected through the season. Once the monsoon ended, the only work left was tiling and finishing.
Civil work, plumbing and waterproofing finished before the rains
Getting material to the site was its own challenge. The villa is in a private gated community up a hill, and the roads in Panshet aren't great. Our vehicles got stuck more than once, with tyres slipping on the slope. In the end our team carried the filters and plumbing material by hand from the base of the hill to the top.
Mrs Nalli was very happy with the result, and with having one team take the pool from design to handover.
The pool at dusk
Planning an elevated or terrace pool? Start here
If there's one thing we'd tell you, it's this: bring a swimming pool expert in first, before anything is built.
A pool isn't one job. It's architectural design, structural design, MEP design, RCC work, waterproofing, plumbing, electrical, tiling with epoxy grout so the tiles last longer, and finally commissioning. An elevated pool raises the stakes on every one of those.
A pool expert doesn't replace your architect or structural consultant. Those designs should come from specialist consultants. What the pool expert does is bring pool know-how to their drawings, coordinate every vendor on site, and keep the whole project on schedule. That's what turnkey means to us.
Wondering about budget, or whether RCC or FRP suits your site? Read our guides to swimming pool construction cost in Pune and RCC vs FRP pools .
Thinking about a pool above a room, on a terrace, or on a sloping plot? Book a site visit with our team, and we'll tell you honestly what your site can take.